The Operating And Instruction of IBC Tank Blow Molding Machine

The Operating And Instruction of IBC Tank Blow Molding Machine

IBC tank blow molding machine developed based on chemical liquid transportation. IBC tonnage is an indispensable tool for modern storage and transportation of liquid products. The whole container  is composed of an inner IBC tank and a metal frame. The inner tank is blowing with high molecular HDPE material(HWMHDPE), which has high strength, corrosion resistance and good hygiene. It is also the advantage of the IBC blow molding machine.

How to operate the IBC tank blow molding machine?

Before the hollow blow molding machine is officially put into production, the following preparations need to be made:

1. Install the mold;

2. Check whether there is any looseness in the various parts of the hollow blow molding machine. If there is, it needs to be tightened and eliminated immediately;

3. Check whether the moving parts of the hollow blow molding machine are flexible and whether they can operate normally. You can check whether the hollow blow molding machine runs idling;

Instruction of the IBC blow molding machine

1. Prepare raw materials that meet the production requirements of IBC ton barrels

Because IBC ton barrels are used to store dangerous or chemical liquids, the raw materials needed for production need to have corrosion resistance.

The plastic IBC tank blow molding machine produced by Yankang generally uses HWMHDPE as the raw material during production. The characteristics of HWMHDPE are not only easy to produce, but the quality of the produced IBC tank is also good, with good corrosion resistance, wear resistance, and impact resistance.

2. According to the product to be produced, set all the production parameters of the hollow blow molding machine

Such as product wall thickness, extruder temperature, heating temperature and time, cooling time, molding temperature and time...etc.

Because Yankang’s full-automatic IBC ton hollow blow molding machine can achieve full-automatic one-step production, from raw material processing, raw material extrusion, raw material injection mold, mold closing, product molding and cooling, to product demolding, the entire process can be performed in one step. Automatic completion, only need to set the relevant production parameters in advance.

Precautions for the use of plastic IBC hollow blow molding machine

1.Throughout the operation and production process of the IBC hollow blow molding machine, we must follow the instructions provided with the machine;

2.Before the formal production, the plastic IBC ton blow molding machine needs to be operated with no-load test machine and loading test machine. This is to eliminate the abnormal situation of the machine and facilitate adjustments before production;

3.In order to ensure the quality of plastic IBC ton barrels, in addition to the correct operation of the hollow blow molding machine, the maintenance and maintenance of the hollow blow molding machine must be done, and at the same time, the appropriate production raw materials must be selected;

4.If any abnormality occurs during the production process of the blow molding machine, please stop the machine immediately for inspection.