Floating Pontoon Machine: Working Principle and Characteristics

Home / Floating Pontoon Machine: Working Principle and Characteristics

Floating Pontoon Machine: Working Principle and Characteristics

Admin August 10, 2019 2 Comments

What are the structure, working principle and advantages of the floating pontoon blow molding machine?

The floating pontoon blow molding machine is a blow molding product production equipment specializing in the production of pontoons,  and ocean balls. There is a large demand for pontoons and pontoons in coastal areas, and pontoons are also used in oil exploration and offshore photovoltaic power generation industries.


The following is the structure, working principle and characteristics of the floating pontoon hollow blow molding machine. I hope it will help those who are not familiar with the floating pontoon blow molding machine.

1. Structure of floating pontton hollow blow molding machine

The floating pontoon hollow blow molding machine includes an extruder, an automatic control system, a hydraulic system, a clamping system, a die head, a mold, a blowing system and a clamping device. With the rapid development of hollow blow molding containers, the high quality of the pontoon, the continuous improvement of the blow molding process of the pontoon, the standardization requirements for molding equipment have increased.

flaoting pontoon blow molding machine

2. the working principle of the floating pontoon hollow blow molding machine

①Melt the plastic polymer into a molten state through an extruder, and extrude the melt into a tubular parison through a die.

②After the parison reaches the design length, the buoy mold is slowly closed to close the plastic parison in the mold.

③When the compressed air is injected into the parison, the parison is blown to make it close to the cavity.

④Low temperature water or air quickly enters the mold for cooling.

⑤Open the mold and take out the formed float.


3. Advantages of floating pontoon hollow blow molding machine

①Juncon hollow blow molding machine is suitable for a variety of plastic raw materials. The pressure in the production process is relatively low, and it expands under low pressure. The residual stress of the container is relatively small, corrosion resistance, tensile resistance, impact resistance, small impact on the environment, high strain performance, and good service performance;

②The blow molding production efficiency is high;

③The temperature of the parison is relatively uniform, and the qualified rate of the finished product is high;

④Not only can produce pontoons, but also other types of hollow blow molding products;

⑤Capable of producing a wide variety of pontoons with single layer, multi-layer, single-component or multi-component;

⑥The cost of the floating hollow blow molding machine is low, the actual operation and use cost of the blow molding machine is low, and the production cost is low;

⑦The blow mold of the pontoon blow molding machine is designed as a female mold, and the wall thickness of the pontoon blow molding machine can be changed by adjusting the parameters of the machine head.

Leave A Reply

Your email address will not be published. Required fiels are marked