JK-20L blow molding machine can produce hollow products up to 20L. The production range can be from 10L to 20L. The die head is designed for continuous type to ensure production efficiency. At the same time, the machine can also be designed as single station or double station. The double-station design can produce two products at the same time. Can meet the high demand of customers for output.
Weight:Customized
Warranty:1 Year
MOQ:1 Set
Service:Installation & Training
Application:stacking barrel
Delivery Time:100 days
1.Parameters of JK-20L Stacking Barrel Blow Molding Machine:
| Model | JK-20L | JK-20L |
| Specification | ||
| Station | 1 | 2 |
| Dry cycle | 700PC/H | 700PC/H*2 |
| Output of HDPE | 85(110)KG/H | 130 |
| Weight | 6000KG | 11000KG |
| Size of Machine(L*W*H) | 3.9*2.1*2.8m | 4.5*3.4*3.1 |
| Die Head | ||
| Max Die Diameter | 220/120mm | 220/120mm |
| Die Head Heating Zone | 3/7 | 3/7 |
| Die Head Heating Power | 9.1/15kw | 9.1/15 |
| Extrusion System | ||
| Screw Diameter | 70(80)mm | 90mm |
| Screw Length/ Diameter Ratio | 25 L/D | 25 L/D |
| Screw Heating Power | 13.2(19)kw | 17.4kw |
| No.of Screw Heating Zone | 3(4) | 4 |
| Clamping Unit | ||
| Platen Distance | 240-620mm | 300-680mm |
| Platen Size | 510*500mm | 690*540mm |
| Clamping Force | 110KN | 158KN |
| Power Unit | ||
| Hydraulic Pump Driving Power | 15kw | 15kw |
| Screw Motor Power | 22(30)kw | 37kw |
| Total power | 59.3(73.1)kw | 78.5kw |
| Average Power | 30(40)kw | 40kw |
2.Advantages of JK-20L Stacking Barrel Blow Molding Machine :
1. The whole machine adopts automatic cutting flash mold, no need to cut side scrap, integral molding,saving in labor, and the production efficiency is high.
2. The equipment can adopt the edge material automatic recovery system, automatic trimming, automatic crushing and reuse. Realize the full automation of the product.
3. The machine can be designed as a single station,but also can design as double station to improve production efficiency.
4. The machine can be designed as a single die head or a double die head. The mold can also be designed as a single cavity or a multi-cavity mold accordingly.
5. Machine hydraulic system: The machine adopts a servo hydraulic system, which can accurately control the pressure and flow according to the actual movement of the machine, and has low energy consumption.
6. Mold clamping system: HIWIN high-precision guide rails are used to ensure platen move quickly. Independent research and development of the oil cylinder, large clamping force, blessing with servo hydraulic system, fast clamping and high precision.
7. Die head: adopts first-in, first-out continuous die head design, using 42Cr nitriding material. Has the advantage of fast color change.
8. Wall thickness control system: 100-point MOOG controller is adopted, with high precision and uniform wall thickness.
9. Electronic control system: Siemens or Mitsubishi can be selected according to customer needs. All international brands, guaranteed after sale.
10. Extrusion system: The screw with high plasticizing ratio is used to ensure sufficient extrusion volume to ensure production efficiency.
11. Extrusion motor: adopt German original Siemens motor and frequency converter, which can adapt to various countries and regions.
12. Pneumatic system; using double blowing system, fast exchange of hot and cold air flow, can ensure rapid product forming.
3.Applications of JK-20L Stacking Barrel Blow Molding Machine:
JK-20L blow molding machine can produce hollow products up to 20L. The production range can be from 10L to 20L.
If you have any requirements about the blow molding machine, please contact me.
Jiaozhou, Qingdao, China
wendy@yancon.com
+86 18669866209
